5C-801W can be used either with the alarm host or with the detector to act as an spot alarm. When alarming, a sharp sound, voice alarm will beep and the warning light will flash.The flexible and convenient installation make it the best choice for home and workplaces to ensure safety.
*Wireless panel (siren with strobe light ): 1pcs
*Remote controller: 2pcs
*Wireless magnetic sensor 5C-618: 2 pcs
*Wireless PIR sensor with bracket: 1pcs
*Power adapter: 1pcs
*User manual: 1pcs
More sensors available on request.
*Working Voltage: 9~15 VDC
*Working current<65mA (12VDC)
*Battery back up:7.2V,500mAH
*Temperature: -20℃ ~ +50℃
*Alarm Sound> 105db
*Wireless frequency: 315MHZ / 433MHZ
*Support wireless sensors:EV1527
*Defense Zones: 30 zones
*Voice prompt: Chinese/English/Other language can be customized per the order
*Distance:open area 100M
*Maximum support 3 remote controllers
*Color: red (blue, orange available)
The system is at a fully ready status where all detectors are activated in a working state, when the events (burglar,fire,gas leak,etc.) happened and detected, alarm system alarm right away.
In a ARM status, the panel ARM light is ON.
To activate using remote control: press arm key 【A】once
At-home ARM(STAY ARM)
This is for partial arming of the alarm system when there are people at home, only some of the selected sensors are activated and could be triggered by evens.
In a STAY ARM status, the panel ARM light is ON.
To activate using remote control: press stay key 【C】once.
All sensors are deactivated and will not be respond to any evens.
In a DISARM status, the panel ARM light is rapidly flashing.
To activate using remote control: press DISARM key 【B】once.
When an emergency occurs, press emergency key【D】on the remote to active alarm