1、The 5C-619 is wireless receiver base on RF wireless technology, which is used to receive the signal from wireless transmitter(door sensor) and convert to wired switch dry contact signal;

2、The 5C-619 has to work with wireless door sensor or other sensors which with EV1527 433MHz sensor, to receive the signal from wireless sensor and output to wired host;

3、It also can be connected to air conditioner, lamp, curtain motor, and trigger by the wireless sensor;

4、16 maximum number of transmitter sensors supported by 5C-619 receiver

2.0 Data sheet -----------------------

*Wireless protocol: RF

* wireless frequency: 433MHZ (others are available on requested)

*working voltage: 9V~24VDC

*receive distance: 100M (indoor 40M)

*Coding chip: EV1527

*Output current: Max. 3A

*Output signal: NO&NC (dry contacts)

*Dimensions:80*36*26mm

*Working temperature:-20~60℃

*Max. supported sensors: 16

3.0 Networking&Using -----------------------

1、Click networking button---receiver get into networking mode, LED indicator flash twice each seconds, the wireless sensors can be matched when trigger at the moment.

2、Press networking button 5 seconds---clear all the matched sensors data.

3、LED indicator will flush 5 times quickly in 1 second , indicated sensor match successfully. the 5C-619 receiver will gets out the networking mode if there is no sensors be matched in 1 minute.

4、When the matched sensors more than 16 sets, the last sensor will cover the first sensor data.

Key words

wireless sensor

5C-52W wireless magnetic contact for metal door

5C-618 wireless magnetic contact